Sort by:
1102 products
1102 products
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Overall Length: | 365mm |
| Weight: | 165g |
| Blade Height @ Heel: | 47mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.4mm |
| Blade Material: | Blue Super Core, Kurouchi Nashiji Stainless Clad |
| HRC: | 63 |
| Handle Material: | Octagon Maple |
Specifications
| Style: | Petty |
| Blade Length: | 130mm |
| Overall Length: | 220mm |
| Weight: | 65g |
| Blade Height @ Heel: | 26mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 1.1mm |
| Blade Material: | SG2 Powder Stainless Steel, Stainless Clad |
| Handle Material: |
Western Wine Red Pakka Wood |
| HRC: | ~63 |
Nigara Hamono Kagetora Blue 2+White 2 Coreless Sakimaru Sujihiki 390mm
Nigara Hamono Kagetora Blue 2+White 2 Coreless Sakimaru Sujihiki 390mm
Specifications
| Style: | Sakimaru Sujihiki |
| Blade Length: | 390mm |
| Overall Length: | 455mm |
| Height @ Heel: | 40mm |
| Spine Thickness @ Heel: | 5mm |
| Spine Thickness @ Mid: | 3.2mm |
| Weight: | 230g |
| Blade Material: | Coreless White 2 + Blue 2 Damascus Black Etched |
| Handle Material: | Octagon Snakewood w/Blonde |
| HRC: | 63 |
Specifications
| Style: | Deba |
| Blade Length: | 155mm |
| Overall Length: | 300mm |
| Weight: | 251g |
| Blade Height @ Heel: | 48mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 6mm |
| Spine Thickness @ Mid: | 5mm |
| Blade Material: | Blue 2 Core, Tsuchime Soft Iron Clad |
| HRC: | ~62 |
| Handle: | Octagon Wenge W/Black Horn |
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Overall Length: | 365mm |
| Weight: | 146g |
| Blade Height @ Heel: | 52mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.9mm |
| Spine Thickness @ Mid: | 1.9mm |
| Spine Thickness 1cm from tip: | 1.2mm |
| Blade Material: | Blue Super Core, Stainless Clad, Kurouchi Finish |
| Handle Material: | Octagon Walnut w/Pakkawood Bolster |
| HRC: | ~63 |
Knife Information
A classy, low-cost serrated bread knife made in Japan. The 27cm length makes for easy cutting of all types of bread.
| Style: | Bread Knife |
| Blade Length: | 270mm |
| Weight: | 130grs |
| Blade Material: | Stainless Steel (AUS8) |
| Handle Material: | Pakkawood |
Specifications
| Style: | Petty |
| Blade Length: | 155mm |
| Overall Length: | 280mm |
| Weight: | 73g |
| Blade Height @ Heel: | 30mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel/Mid: | 1.8mm/1.5mm |
| Blade Material: | SG2 Core, Stainless Damascus Clad |
| Handle Material: | Walnut Octagon w/ Maple Ferrule |
| HRC: | ~64 |
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Overall Length: | 363mm |
| Weight: | 164g |
| Blade Height @ Heel: | 54mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2mm |
| Spine Thickness @ Mid: | 1.8mm |
| Spine Thickness 1cm from tip: | 0.8mm |
| Blade Material: | Shirogami 2 with Damascus Clad |
| Handle Material: | Octagon Walnut w/Pakkawood Bolster |
| HRC: | 62 |
Specifications
| Style: | Gyuto |
| Blade Length: | 240mm |
| Overall Length: | 390mm |
| Weight: | 167g |
| Blade Height @ Heel: | 52mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | SG2 Core, Stainless Clad |
| Handle Material: | Dark Red Lacquered Septagon |
| HRC: | ~64 |
165mm Blue Super Core, Tsuchime Stainless Clad Bunka Knife
Specifications
| Style: | Bunka |
| Blade Length: | 165mm |
| Overall Length: | 315mm |
| Weight: | 145g |
| Blade Height @ Heel: | 44mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | Blue Super Core, Tsuchime Stainless Clad |
| HRC: | 63 |
| Handle Material: | Octagon Maple w/White Spacer |
Knife Information
Takeshi Saji has perhaps one of the widest ranges of blade finishes and stylistic creations of any blacksmith in Japan. He works with all Japanese Carbon Steels, as well as R2, VG10, and others. He crafts his own Damascus in Rainbow, Diamond, and Black Nickel finishes, and fits a wide range of handle types. He can truly do it all, and all at the ripe young age of 73. To this day he produces functional works of art out of the Takefu Knife Village in Japan, surrounded by other like-minded craftsman.
Best paired with a camellia oil, wooden saya and a 1000/6000 whetstone
Specifications
| Style: | Bunka |
| Blade Length: | 175mm |
| Overall Length: | 300mm |
| Weight: | 238g |
| Blade Height @ Heel: | 49mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Blue 2 Core, Stainless Rainbow Damascus Clad |
| Handle Material: | Western Desert Ironwood |
| HRC: | ~63 |
Specifications
| Style: | Nakiri |
| Blade Length: | 165mm |
| Overall Length: | 265mm |
| Weight: | 195g |
| Blade Height @ Heel: | 46mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Blue 2 Core Carbon Clad, Kurouchi Finish |
| Handle: | Octagon Ebony |
| HRC: | ~62-63 |
Knife Information
Yu Kurosaki is now one of the most well-known blacksmiths in Japan. He experienced a rapid rise to fame through his beautiful knife aesthetics, his thin grinds, and use of exotic steels like SG2, HAP40, and stainless-clad Blue Super. The Fujin was among one of the first lines of his that contributed to this fame. The striking Tsuchime finish is now instantly recognizable and is truly a piece to be experienced first-hand.
Best paired with a wooden saya and a 1000/6000 whetstone
Steel Breakdown
SG2 is a powder stainless steel made by The Takefu Special Steel Company in Takefu, Japan. It is, in our eyes, the ultimate combination of edge retention, stainless properties, and ease of sharpening. Having more carbon than the Carbon Steels like White and Blue, yet more stainless elements than VG10, knives using this steel are the best of both worlds without the downsides.
Knives with an SG2 core are becoming more prevalent in Japan due to these reasons. Their overall cost may be higher, but is well justified in our opinion.
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Overall Length: | ~250mm |
| Weight: | 80g |
| Blade Height @ Heel: | 30mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.4mm |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | SG2 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Rosewood |
| HRC: | ~63 |
Specifications
| Style: | Petty |
| Blade Length: | 115mm |
| Overall Length: | 240mm |
| Height @ Heel: | 31mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 73g |
| Blade Material: | SG2 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Ebony |
| HRC: | ∼63 |
Knife Information
Tadafusa manufacture their knives in the city of Sanjo, well known across Japan as the ‘town of blacksmiths’. The likes of Yoshikane, Hinoura, and Kawamura all hail from the same city. Tadafusa was founded in 1948 by Sone Torasaburo, who began making sickles, knives, and other bladed tools using traditional forging methods, but then began to specialise in kitchen knives, which has culminated in the immaculate pieces you see here.
Best paired with a camellia oil, wooden saya and a 1000/6000 whetstone
This knife is great for:
✅ Those wanting a fairly easy knife to maintain, but don't mind carbon steel maintenance
✅ Those who like slightly thicker and heavier knives with comfy western style handles
✅ Pinch grip cutters
✅ Larger cutting (larger meats etc)
Specifications
| Style: | Gyuto |
| Blade Length: | 240mm |
| Overall Length: | 397mm |
| Weight: | 215g |
| Blade Height: | 50mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 4.2mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.9m |
| Blade Material: | Blue 2 Core w/stainless clad |
| Handle Material: | Octagon Walnut |
| HRC: | ~63 |
Specifications
| Style: | Nakiri |
| Blade Length: | 160mm |
| Overall Length: | 345mm |
| Height @ Heel: | 48.5mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 162g |
| Blade Material: | SG2 Core, Damascus Clad |
| Handle Material: | Octagon Dark Maple |
| HRC: | ∼63 |
Specifications
| Style: | Gyuto |
| Blade Length: | 185mm |
| Overall Length: | 332mm |
| Weight: | 150g |
| Blade Height @ Heel: | 43mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 4mm |
| Blade Material: | Blue Super Core, Stainless Nashiji Kurouchi Clad |
| HRC: | 63 |
| Handle Material: | Octagon Maple |
Specifications
| Style: | Santoku |
| Blade Length: | 175mm |
| Overall Length: | 297mm |
| Weight: | 151g |
| Blade Height @ Heel: | 46mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 1.5mm |
| Blade Material: | Chromax Semi Stainless Core w/ Stainless Tsuchime Clad |
| Handle Material: | Brown Pakka Wood |
| HRC: | 63-64 |
Specifications
| Style: | Bunka |
| Blade Length: | 165mm |
| Overall Length: | 360mm |
| Weight: | 195g |
| Blade Height @ Heel: | 50mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.6mm |
| Blade Material: | White 2 Core, Stainless Nashiji Cladding |
| Handle Material: | Maple |
| HRC: | 63 |
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Overall Length: | 340mm |
| Height @ Heel: | 47mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 179grs |
| Blade Material: | White 2 Carbon Steel core + Soft Iron Kurouchi Clad |
| Handle Material: | Octagon Charred Oak |
| HRC: | ~62-63 |
Specifications
| Style: | Gyuto |
| Blade Length: | 235mm |
| Overall Length: | 385mm |
| Weight: | 189g |
| Blade Height @ Heel: | 49mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.5mm |
| Spine Thickness @ Mid: | 2.2mm |
| Blade Material: | Ginsan Core, Stainless Kasumi Clad |
| HRC: | 61 |
| Handle Material: | Octagon Dark Maple |
Specifications
| Style: | Santoku |
| Blade Length: | 180mm |
| Overall Length: | 385mm |
| Weight: | 172g |
| Blade Height @ Heel: | 48mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.8mm |
| Blade Material: | Blue 2 Core (Pre-etched), Soft Iron Kurouchi Damascus Clad |
| Handle Material: | Octagon Bubinga |
| HRC: | 62 |