Sort by:
Tsunehisa White 2 SS Clad Tsuchime Gyuto 210mm - Carbon Fibre
Tsunehisa White 2 SS Clad Tsuchime Gyuto 210mm - Carbon Fibre
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Overall Length: | 365mm |
| Weight: | 165g |
| Blade Height @ Heel: | 47mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.4mm |
| Blade Material: | Shirogami 1 (White) Core, Stainless Clad |
| HRC: | 61-62 |
| Handle Material: | Octagon Ebony |
Asahi Soft Rubber Cutting Board with excellent cutting feel, slightly flexible and easy to clean!
Size: 265 x 175 x 8mm
For full care instructions and product information please see the link below:
http://www.parker-asahi.co.jp/pdf/Elastic_Rubber_Chop_Board_en.pdf
Specifications
| Style: | Gyuto |
| Blade Length: | 193mm |
| Overall Length: | 350mm |
| Height @ Heel: | 45mm |
| Spine Thickness @ Mid: | 3mm |
| Weight: | 182g |
| Blade Material: | White 2 Carbon Steel core + Soft Iron Kasumi Clad |
| Handle Material: |
Dark Oak Octagon |
| HRC: | 62-63 |
Specifications
| Style: | Deba |
| Blade Length: | 180mm |
| Overall Length: | 330mm |
| Weight: | 334g |
| Blade Height @ Heel: | 54mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 8mm |
| Blade Material: | White 2 Carbon Steel Core + Soft Iron Clad |
| Handle Material: | Oval Magnolia |
| HRC: | 62-63 |
Ceramics Information
Capacity: 280ml
*Please select the correct handle size before confirming your order.*
Chefs Edge will not accept responsibility if the wrong-sized handle is selected.
Fancy up your kitchen knives with a custom handle! This stunning Octagon handle is crafted from African Blackwood and Black Buffalo Horn, and is suitable for Petty blades. African Blackwood is preferred over Ebony due to it's high toughness, whereas Ebony has a tendency to crack during production.
Handles are made from natural timber and as such can vary in tone, grain, and general appearance. Some are lighter/darker than others.
Specifications
| Style: | Petty |
| Blade Length: | 143mm |
| Overall Length: | 281mm |
| Height @ Heel: | 29mm |
| Spine Thickness @ Mid: | 3mm |
| Weight: | 107g |
| Blade Material: | White 2 Carbon Steel core + Soft Iron Kasumi Clad |
| Handle Material: |
Dark Oak Octagon |
| HRC: | 62-63 |
When you're trying to achieve an ultra-precise edge, the slightest wobble or vibration can result in distortions in the blade. The GS Holder is heavy enough to use as a sharpening base, and its form gives it stability far higher than that of the GS Field Holder.
- Dimensions: 259 x 86 x 56mm
- Weight: approx. 1,960g
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 40
-
Mesh: 320
Specifications
| Style: | Nakiri |
| Blade Length: | 165mm |
| Weight: | 164gms |
| Blade Material: | SG2 Powdered Stainless Steel |
| Handle Material: | Black Pakkawood w/mosaic pin |
| HRC: | 64 |
Specifications
| Style: | Petty |
| Blade Length: | 135mm |
| Overall Length: | 240mm |
| Weight: | 77g |
| Blade Height @ Heel: | 27mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Blue Super Core, Tsuchime Stainless Clad |
| HRC: | 63 |
| Handle: | Western Style Black Pakka |
The Stando project is a result of my interest in updating the ubiquitous kitchen tongs — which often tears or breaks food and feels like cooking with two clumsy thumbs. We calibrated Stando to feel like a delicate extension of one’s fingers.
We ditched the bland and clinical look of tongs, and replaced it with a soft streamlined shape.
The namesake feature, a curved stand in the middle of the tool provides a wide surface area for finger placement and grip. The stand also keeps the tips elevated off the ground while not in use.
The curve has been strategically placed to lean on vessels like 1/9 pans, pint containers, bowls, pan handles - anything with a lip or corner, really.
If you think of tweezers as solely reserved for micro greens and delicate plating, I encourage you to give Stando a try as an every day tool.
Each piece is stamped, etched, and finished by hand at Mr. Ando’s workshop.
Form-
Stando combines the long tapered profile of Japanese cooking chopsticks with the tension and precision of plating tweezers. It is comfortable everywhere from turning small veg in a small pan, to handling noodles and grilling.
Origin-
Niigata, Japan
Material-
18/8 Japanese stainless steel
Length-
10 inches
Cleaning-
Hand-wash only, please.
Packaging-
Packaging is constructed with recycled chipboard