Sort by:
1650 products
1650 products
Specifications
| Style: | Gyuto |
| Blade Length: | 240mm |
| Overall Length: | 380mm |
| Height @ Heel: | 50mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 182grs |
| Blade Material: | White 2 Carbon Steel core + Soft Iron Kasumi Clad |
| Handle Material: | Ebony w/Black Buffalo Horn |
| HRC: | 62-63 |
About the Natsuya
The Amakusa is a natural whetstone used at the start of a natural stone progression. They are of slighter higher hardness and are fast cutting.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*
About the Natsuya
The Amakusa is a natural whetstone used at the start of a natural stone progression. They are of slighter higher hardness and are fast cutting.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Overall Length: | 355mm |
| Weight: | 184g |
| Blade Height @ Heel: | 59mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.4mm |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Blue 2 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Walnut w/ Maple Bolster |
| HRC: | ~62 |
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Weight: | 95g |
| Blade Height @ Heel: | 33mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.2mm |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Blue 2 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Rosewood |
| HRC: | ~62 |
Specifications
| Style: | Nakiri |
| Blade Length: | 165mm |
| Overall Length: | 310mm |
| Weight: | 184g |
| Blade Height @ Heel: | 58mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.4mm |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Blue 2 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Walnut w/ Maple Bolster |
| HRC: | ~62 |
Specifications
| Style: | Sujihiki |
| Blade Length: | 270mm |
| Overall Length: | 410mm |
| Weight: | 140g |
| Blade Height @ Heel: | 36mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | Ginsan Core, Migaki Soft Stainless Clad |
| Handle Material: | Octagon Oak |
Knife Information
Who doesn't want a whale knife? Hand-forged carbon steel with soft iron clad. A perfect utility/chopper with great edge retention.
STEEL BREAKDOWN – Blue Steel is a traditional high-carbon steel made by Hitachi Metals in Japan. It is the favourite steel of many knife makers and chefs across the world for its fantastic edge holding ability, toughness, and ease of sharpening. It contains few stainless elements, and as such will develop a patina, and develop rust spots if left wet after use. It requires a little more care and maintenance than something like VG-10 (Stainless Steel), so consider this when purchasing a Blue Steel knife as your first Japanese knife.
Specifications
| Style: | Utility |
| Edge Length: |
58mm |
Specifications
| Style: | Deba |
| Blade Length: | 165mm |
| Overall Length: | 310mm |
| Weight: | 283g |
| Blade Height @ Heel: | 50mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 7mm |
| Blade Material: | White 2 Carbon Steel Core + Soft Iron Clad |
| Handle Material: | Octagon Walnut w/ Pakka Wood Bolster |
| HRC: | 62-63 |
Specifications
| Style: | Deba |
| Blade Length: | 180mm |
| Overall Length: | 335mm |
| Weight: | 309g |
| Blade Height @ Heel: | 55mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 7mm |
| Blade Material: | White 2 Carbon Steel Core + Soft Iron Clad |
| Handle Material: | Octagon Walnut w/Pakka Wood Bolster |
| HRC: | 62-63 |
Specifications
| Style: | Deba |
| Blade Length: | 210mm |
| Overall Length: | 380mm |
| Weight: | 407g |
| Blade Height @ Heel: | 60mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 8mm |
| Blade Material: | White 2 Carbon Steel Core + Soft Iron Clad |
| Handle Material: | Octagon Walnut w/ Pakka Wood Bolster |
| HRC: | 62-63 |
Specifications
| Style: | Gyuto |
| Blade Length: | 195mm |
| Overall Length: | 340mm |
| Height @ Heel: | 45mm |
| Spine Thickness @ Mid: | 2.8mm |
| Weight: | 136grs |
| Blade Material: | Blue 1 Carbon Steel core + Soft Iron Clad |
| Handle Material: | Octagon Magnolia w/Black Buffalo Horn |
| HRC: | 63-64 |
Specifications
| Blacksmith: | Yoshikazu Tanaka |
| Style: | Gyuto |
| Blade Length: | 220mm |
| Overall Length: | 376mm |
| Height @ Heel: | 49mm |
| Spine Thickness @ Mid: | 2.8mm |
| Weight: | 173grs |
| Blade Material: | Blue 1 Carbon Steel core + Soft Iron Clad |
| Handle Material: | Octagon Magnolia w/Black Buffalo Horn |
| HRC: | 63-64 |
Asahi Professional Synthetic Rubber Cutting Board - 600x330x15
Asahi Professional Synthetic Rubber Cutting Board - 600x330x15
*AVAILABLE TO AUSTRALIAN CUSTOMERS ONLY. WE CANNOT SHIP THESE INTERNATIONALLY*
Asahi have been manufacturing synthetic cutting boards for Japanese knives for over 50 years. Over this span of time they have refined their products and now offer some of the best quality cutting boards in the world.
There are some great benefits to using a synthetic board:
- They are Antibacterial/Mould resistant. This is a huge advantage over wooden cutting boards that hold bacteria even after washing.
- Easy on knives. They have a wood-like texture and good feedback.
- They are scratch and wear resistant, and very tough. A test was completed after 50,000 cuts in a controlled environment, and the synthetic board had approximately 66% less wear depth.
- Stability. These boards are weighty, they don't slide around on the bench.
For full care instructions and product information please see the link below:
http://www.parker-asahi.co.jp/pdf/Elastic_Rubber_Chop_Board_en.pdf
Specifications
| Style: | Yanagiba |
| Blade Length: | 240mm |
| Overall Length: | 378mm |
| Weight: | 147g |
| Blade Height @ Heel: | 31.5mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 4mm |
| Blade Material: | White 2 Carbon Steel Core + Soft Iron Clad |
| Handle Material: | Octagon Walnut w/Pakka Wood Bolster |
| HRC: | 62-63 |
Specifications
| Style: | Yanagiba |
| Blade Length: | 260mm |
| Overall Length: | 431mm |
| Weight: | 180g |
| Blade Height @ Heel: | 33mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 4mm |
| Blade Material: | White 2 Carbon Steel Core + Soft Iron Clad |
| Handle Material: | Octagon Walnut w/ Pakka Wood Bolster |
| HRC: | 62-63 |
Specifications
| Style: | Yanagiba |
| Blade Length: | 290mm |
| Overall Length: | 443mm |
| Weight: | 209g |
| Blade Height @ Heel: | 34.5mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 3.5mm |
| Blade Material: | White 2 Carbon Steel Core + Soft Iron Clad |
| Handle Material: | Octagon Walnut w/Pakka Wood Bolster |
| HRC: | 62-63 |
Specifications
| Style: | Nakiri |
| Blade Length: | 165mm |
| Overall Length: | 290mm |
| Weight: | 170g |
| Blade Height @ Heel: | 45mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.5mm |
| Blade Material: | VG1, Stainless Clad |
| Handle Material: | Western Pakka Wood |
Specifications
| Style: | Gyuto |
| Blade Length: | 180mm |
| Overall Length: | 300mm |
| Weight: | 147g |
| Blade Height @ Heel: | 42mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.5mm |
| Blade Material: | VG1, Stainless Clad |
| Handle Material: | Western Pakka Wood |
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
Ceramics Information
Handmade in Gifu prefecture.
Jug measurements
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Micron: 29.4
- Mesh: 500
- 360g
