The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives. 

With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.   

A high grade 5000 grit ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.  

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

The GS Field Holder is designed to store three Shapton GlassStones neatly. When turned over, it can also be used as a sharpening base.

Dimensions: 253 x 80 x 53mm

Weight: approx. 640g

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

• Coarse Whetstone (Used for bevel flattening, large chip repair, complete edge refurbishing)
  
• Size: 210 x 75 x 26mm
• 880g

Accessories Information

Includes

• Yoshoku 1000/6000 Grit Deluxe Combination Stone (soak for 5-10 minutes before use)
• Approx. stone dimensions: 180mm x 60mm x 30mm
• Guide Clip
• Nagura Stone (flattening stone)
• Bamboo holder with rubber nonslip base
• Best paired with a lapping stone/plate for flatting between use
• Entry level stone

Accessories Information

One of the best whetstone holders money can buy. Heavy duty, sturdy, and of the highest quality. 
– Sturdy stainless steel and rubber construction 
– Heavy Duty Locking Screw
– Holds stones from 150mm to 250mm in length

Accessories Information

• Guide Clip
  
• Clip to the spine of your knife to maintain a consistent sharpening angle

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #120 Very Coarse (Only for larger repairs)

Weight:

Dimensions:  

Accessories Information

The Knife Maintenance Bundle was designed to offer incredible value for money with a 1000/3000 grit whetstone with base, guide clip and nagura stone for achieving sharp edges on your knives, and a 10" black ceramic steel honing rod to maintain these edges between sharpening.

• Best paired with a lapping stone/plate for flatting between use
• Entry level stone

The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives. 

With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.   

A high grade ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.  

Accessories Information

Includes

• Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
• Approx. stone dimensions: 180mm x 60mm x 30mm
• Guide Clip
• Nagura Stone (flattening stone)
• Bamboo holder with rubber nonslip base
• Suitable for VG10, AUS8 & softer stainless applications
• Best paired with a lapping stone/plate for flatting between use
• Entry level stone

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #8000 Very Fine (For honing or edge polishing, use after the 5000)

Weight:

Dimensions:  

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

Accessories Information

Heavy duty, sturdy rubber-based whetstone holder. 
– Sturdy stainless steel and rubber construction 
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length

– Weight: 577g

Accessories Information

Suehiro is Japanese-made and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/6000 grit for dull knives or moderate/small chip repair followed by polishing
– Includes a sturdy plastic base with rubber feet
– Includes small Nagura stone

-  175mm x 60mm x ~11-14mm (per grit)
– 950g weight

These Naniwa are excellent bang for buck, albeit being a little smaller than traditional stones. Great for touching up of Petty/Bunka/Nakiri size blades and smaller Gyuto.

• Medium-Soft
• Whetstone grit ＃1000
• Whetstone Size 175×55×15mm
  

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 40
• Mesh: 320
  

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 25
• Mesh: 500
  

Accessories Information

Suehiro are Japanese-made whetstones and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/3000 grit for dull knives or moderate/small chip repair followed by finishing
– Includes sturdy plastic base with rubber feet
– Includes small Nagura stone

- 175mm x 60mm x ~11-14mm (per grit)
– 950g weight

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 2
• Mesh: 6000
  
• No Case Included

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 1
• Mesh: 8000
  

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

When it comes to sharpening, stability makes all the difference. You could wrestle with a stone that moves around on you, or you could use this tool to keep it secure, making the process safer and more enjoyable.

This sink bridge takes sharpening setups to the next level. It offers an easy way to access water while keeping cleanup simple. With adjustable grips to fit nearly any sink and hold stones of all sizes, it’s a versatile and reliable solution for any sharpening task.

Width: 83mm

Smallest and largest sink: 280mm to 430mm

Maximum stone length : 215mm 

Accessories Information

This 1000/4000 kit is the perfect maintenance bundle for keeping both carbon and stainless knives in top condition. A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

• Size: 210 x 75 x 26mm
• 840g

Accessories Information

The Knife Maintenance Bundle was designed to offer incredible value for money with a 1000/6000 grit whetstone with base, guide clip and nagura stone for achieving sharp edges on your knives, and a 10" black ceramic steel honing rod to maintain these edges between sharpening.

• Best paired with a lapping stone/plate for flatting between use
• Entry level stone

The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives. 

With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.   

A high grade ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.