Wholesale
Sort by:
Accessories Information
Specifications
| Style: | Gloss Black Stainless Steel |
| Length: | 159mm |
| Volume | ~1 Teaspoon |
Accessories Information
| Style: | Offset Plating Tweezer |
| Blade Length: | 150mm |
| Construction: | Stainless Steel |
Accessories Information
| Style: | Brushed Matte Copper |
| Effective Length: | 80mm |
| Construction: | Stainless Steel |
*Available to Australian customers only*
Specifications
| Style: | Petty |
| Blade Length: | 150mm |
| Weight: | 135g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |
165mm Ginsan Core, Nashiji Soft Stainless Clad Bunka Knife.
Specifications
| Style: | Bunka |
| Blade Length: | 165mm |
| Overall Length: | 314mm |
| Weight: | 136g |
| Blade Height @ Heel: | 43mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | Ginsan Core, Nashiji Soft Stainless Clad |
| Handle Material: | Octagon Oak |
| HRC: | 61 |
*Available to Australian customers only
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Weight: | 179gms |
| Blade Material: | SG2 Powdered Stainless Steel |
| Handle Material: | Black Pakkawood w/mosaic pin |
| HRC: | 64 |
165mm SG2 Powdered Stainless Steel Bunka Knife
*Available to Australian customers only
Specifications
| Style: | Bunka |
| Blade Length: | 165mm |
| Weight: | 164gms |
| Blade Material: | SG2 Powdered Stainless Steel |
| Handle Material: | Black Pakkawood w/mosaic pin |
| HRC: | 64 |
Accessories Information
- 500 Grit Nagura Stone
- Cleaning and flattening Yoshoku Whetstone
Knife Information
A classy, low-cost serrated bread knife made in Japan. The 27cm length makes for easy cutting of all types of bread.
| Style: | Bread Knife |
| Blade Length: | 210mm |
| Weight: | 103grs |
| Blade Material: | Stainless Steel (AUS8) |
| Handle Material: | Timber |
Accessories Information
| Style: | Offset Plating Tweezer |
| Length: | 200mm |
| Construction: | Stainless Steel |
Accessories Information
Specifications
| Style: | Gloss Silver Stainless Steel |
| Length: | 220mm |
| Volume | ~1 Tablespoon |
Accessories Information
| Style: | Gloss Silver |
| Length: | 195mm |
| Construction: | Stainless Steel |
The Maple Magnetic Knife Holder is a minimal and elegant knife display and storage solution for those who may not have room for bulky knife blocks that take up vital bench space.
– Maple timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H
- Knives not included
*Chefs Edge is not liable for any damage caused to knives while using the magnetic holder*
The 'Ever Peeler' took a lot of time and planning, after comparing over 200 types of peelers from around the world before the final design was settled on. Completely made in Japan this peeler can not only peel potatoes and carrots but is able to shred cabbage too. Crafted to have the sharpest possible blade and also durability of that sharpness has resulted in a peeler of the highest quality.
To reduce wastage the creators of the 'Ever Peeler' also made replaceable blades available so your peeler can be restored with a new blade if needed.
*Available to Australian customers only*
Specifications
| Style: | Slicer |
| Blade Length: | 240mm |
| Weight: | 170g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |