Japanese Sharpening Whetstones
54 products
54 products
Sort by:
Japanese Sharpening Whetstones
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #120 -> #320 -> #1000 -> #5000 -> #8000
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #5000 Fine (For Honing, or for edge polishing, use after the 1000)
Weight:
Dimensions:
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #120 Very Coarse (Only for larger repairs)
Weight:
Dimensions:
About the Natsuya
The Binsui is a natural whetstone that is used after lower grit stones, they form the base of a natural stone polish and are of a higher hardness.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*
About the Ohira
This stone is a very fine, moderate hardness finishing stone around ~5000 grit. Simply splash and go, work up a slurry initially with firm pressure, then let the mud do the rest.
Ohira is a little softer natural stone used to make the traditional kasumi finish that gives the cladding a cloudy, misty look. The stone produces slurry quickly and leaves an even finish on blades from laminated steels, creating visible contrast. It is very simple to use and its advantage is that it leaves very visible traces of previous sharpening on the blade, revealing all irregularities and low spots, in turn telling us which areas of the blade we should hone in on.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*
About the Ozuku
This stone is a very fine, hard finishing stone around ~10,000 grit. Simply splash and go, work up a slurry preferably with a Nagura stone, as this stone does not form a slurry quickly.
Named for the site of its origin, the Ozuku Japanese Natural Whetstone is a product of its homeland’s finest honing practices. Although the material used to produce these pieces comes from the same site, its depth means that there can be significant differences between individual stones. As a result, even though most of these stones fall within 8,000 to 12,000 grit, the actual grit size must be discovered through actual usage. Customers should bear in mind that these pieces are meant to be used along with nagura stones, which are rubbed atop their wet surfaces to produce an abrasive slurry.
Ozuku are mined in Kyoto Japan, one of the Higashi-mono, referring to a collection of five quarries famous since ancient times for their sharpening stones. Stones from Ozuku are renowned for their fine grain and exceptional hardness, though some examples can be too hard at times.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
- Guide Clip
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Suitable for VG10, AUS8 & softer stainless applications
Accessories Information
Suehiro is Japanese-made and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/6000 grit for dull knives or moderate/small chip repair followed by polishing
– Includes a sturdy plastic base with rubber feet
– Includes small Nagura stone
– 950g weight
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Micron: 14.7
- Mesh: 1000
- 360g
Accessory Information
The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at just shy of 700g, these will make light work of even the hardest stones.
– Low 140 Grit for fast removal of stone surface
– Integrated handle makes flattening incredibly fast & easy
– Replaceable abrasive sheet
Accessories Information
- 500 Grit Nagura Stone
- Cleaning and flattening Yoshoku Whetstone
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
Accessories Information
Supreme whetstones made by Suehiro Japan. The Debado are splash and go stone, the 180 Grit being the first step for large chip repair or edge restoration. An extremely fast cutter without premature uneven wear.
Accessories Information
This synthetic/natural powder (Mikawa Nagura) blend is a perfect finisher for most stainless steels (AUS8/10, VG10, Ginsan etc) and provides a very toothy yet refined everyday edge for carbon knives. Designed to be used after the 1000 grit Ikyu Shin Nagura.
These are soaking stones on the softer side which are best used with a slurry, so use a lapping plate or Nagura stone.
Accessory Information
The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at 600g, these will make light work of even the hardest stones.
– Low 140 Grit for very fast removal of stone surface
– Replaceable abrasive sheet
Accessories Information
These Japanese made whetstones are some of the most popular on the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear. The 320/800 grit is a great combination stone to start chip repairs, and work your way up to higher grits. We would recommend the 1500 as the next step up, then a higher grit polishing stone for a complete set.
- Two-Sided Whetstone #800 Red／#320 Grey
- Whetstone Size 183×63×13 ／ 183×63×15mm
- Package Size 240×93×46mm
- Appr. 1000g
- Soaking Stone
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
Accessories Information
Supreme whetstones made by Suehiro Japan. The Debado are splash and go stone, the 1000 grit being a fantastic micro-chip remover or for attaining bitey edges without being overpolished. Slow wearing, great feedback, on the firmer side.